packages
  
Not included
   
All Specs
  
Distributors
   







 
Distributors
Contact Us
Site Index







packages

In addition to a camera, a system includes hardware and software needed for recording the optical and electrical data#. However, many additional items (microscope, light source, shutter, vibration isolation table) are needed for performing imaging experiments. A discussion of those is provided under not included. A useful tool for comparing the different cameras is our data table.
Please ask us about our on-site installation.

Warranty/Support :
 All systems below come with one year warranty on the hardware and three years technical support via telephone or e-mail.


C A M E R A S :
Every full camera system generally includes:
The specific camera (or cameras) with power supply
appropriate optical couplers (based on chip size)
An A-to-D and D-to-A card and Control Panel for electrode recording and TTL outputs for experimental control
A PC (Up-to-date Workstation); Monitor not included
Turbo-SM for data acquisition and display
       
FOR LIGHT LEVEL :DESCRIPTIONCODE
Low to High   DaVinci-2K-CMOS camera - SciMeasure 2048x2048 camera
   (NDR mode for STORM imaging, windowing and on-chip binning for high speed VSD and Ca imaging) 
DV2K
Low to Medium   FastCMOS-128X camera - SciMeasure 128x128 camera (for high speed tracking)FCMS-128X
Low to Medium   NeuroCCD-SMQ imaging system -  SciMeasure 80x80 CCD camera (for VSD, GEVI, Ca imaging)NCS01
Low to Medium   Dual NeuroCCD-SMQ imaging system - 2 SciMeasure 80x80 camera heads with one controller NCS01-DH
Low to Medium   NeuroCCD-SM256 imaging system - SciMeasure 256X256 camera (for VSD, GEVI, Ca imaging) NCS256
High   NeuroCMOS-DW128 imaging system - SciMeasure Deep Well 128x128 camera (for VSD imaging, iSCAT)NMS128
High   NeuroCMOS-DW128f imaging system -  SciMeasure fast Deep Well camera (for VSD imaging, iSCAT)NMS128F
high   Dual NeuroCMOS-DW128f imaging system - 2 SciMeasure fast DW camera heads with one controllerNMS128F-DH

     
O T H E R   H A R D W A R E :
DESCRIPTIONCODE
           Macroscope-IIa -
2X and 4X lenses
Mount for ordinary microscope objective lens
Dichroic mirror
Beam diverter
Dual C-mount ports
C-mount for NeuroPDA-II or NeuroCCD-SM camera 
MA01
          Ratio-Add-On - 
75W Optosource xenon arc lamp and power supply (Ultra high point intensity)
Light source output coupling for Cairn lamphouse (incl.iris Diaphragm)
Optoscan monochromator with full rapid galvo grating and slit width with Power supply
UV transmitting liquid light guide (3mm diameter, 2 metre long)
Calibration and filter test accessory for Optoscan.
Episcopic light guide coupling for specified microscope.
Additional Microstar A-to-D card 
   
NCS-RAO
          QIOPTIQ-20 lens system - A lense system designed to image 10-20mm objects onto the NeuroCCD-SM/SMQ camera.
                                                     Includes a C mount on one end.
Q20
          QIOPTIQ-50 lens system - A lense system designed to image 20-50mm objects onto the NeuroCCD-SM/SMQ camera.
                                                     Includes a C mount on one end.
Q50

# Redshirt products are not intended for use as medical devices as described in the Food Drug and Cosmetic Act. 

 
back to top

 

 Updated Aug 2013